Kenworth trucks are known for their quality and durability, but even the best trucks can have problems from time to time. That’s why it’s essential to understand what the different Kenworth warning lights on your dash mean. In this article, we’ll explain the most common symbols and what they indicate.
Alternative article: Kenworth Dash Warning Lights Meaning
What do Kenworth Warning Light Symbols Mean?
Kenworth is one of the leading manufacturers of heavy-duty trucks, and many different warning light symbols can be displayed on their trucks. These symbols are designed to give the driver a quick indication of what is wrong with the car and how to fix it. Here is a short guide to some of the most common Kenworth warning light symbols:
- Blinking Red Light: This indicates an engine fault, and the truck needs to be taken to a Kenworth dealer for service.
- Amber Light: This indicates a problem with the truck’s emissions system. The car should be taken to a Kenworth dealer for service.
- Red Light indicates that the truck’s brakes are not working correctly. The car should be taken to a Kenworth dealer for service.
- Yellow Light: This indicates that the truck’s engine is overheating. The driver should pull over and turn off the engine immediately. Once the engine has cooled down, it can be restarted and driven to a Kenworth dealer for service.
- Green Light: This means that the truck’s engine is functioning correctly.
See also: JLG Boom Lift Warning Lights
How to Read Kenworth Warning Lights
As a driver, it’s essential to understand the warning lights on your Kenworth truck. After all, these lights are there for a reason – to warn you of potential problems with your vehicle.
See also: Kenworth Warning Light
Fortunately, reading Kenworth warning lights is relatively easy once you know what to look for. There are three different types of lights: red, amber, and green. Red lights indicate the most serious problems, while amber lights indicate less severe issues. Green lights mean that a system is active or functioning correctly.
Read also: Jlg Scissor Lift Warning Light Flashing
- Red Brake System Warning Light: This light indicates a truck brake system problem. If this light comes on, you should pull over and investigate the issue as soon as possible.
- Amber Engine Warning Light: This light indicates a problem with the engine. If this light comes on, you should pull over and have the truck inspected by a mechanic as soon as possible.
- Yellow Oil Pressure Light: This light comes on when the oil pressure is low and needs to be checked.
- Red Battery Warning Light: This light comes on when there is an issue with the battery and needs to be serviced or replaced.
Now that you know what some of the most common Kenworth warning light symbols mean, you can be better prepared to handle any situation that comes your way. Always consult your owner’s manual for more specific information on each light, and never hesitate to contact a qualified technician if you’re ever in doubt.
Recommended article: JLg Warning Light Troubleshooting Guide
FAQs About Kenworth Warning Light
What does wrench on Kenworth mean?
The wrench light alerts drivers about a problem with the car and its engine or transmission. The light will appear when you need to scan the computer to see what may be broken. Otherwise, you won’t know when it’s happening.
How does a Kenworth coolant level sensor work?
When temperature alerts are triggered, the coolant levels will alert you. Sensors measure the coolant level with built-in float sensors that work with a magnet and closing reed switches. Once the coolant reaches a specific range, the float follows it to complete the reed switch and open it back up again, alerting you about temperature change.
What does the coolant light look like?
If you are having engine trouble and suspect overheating, know that this warning light will show up on the dashboard gauge cluster. It will look like a thermometer or show letters: ‘Temp’ or ‘Engine Overheating.’
What does this dashboard warning light mean?
When a red light appears, the driver must immediately act and not drive further. Should the warning be yellow or orange, this would indicate an issue that needs to be serviced at soon as possible. Conversely, if green or blue lights are visible, this usually denotes that a particular car feature is engaged or operational.
What does the red engine light mean on a Kenworth?
Dean explained that the red Stop Engine lamp is the most urgent indicator in Kenworth trucks. In addition to this visual cue, an audible tone will sound should a serious engine system problem be detected, requiring immediate action. When this occurs, drivers must bring the vehicle to a safe stop and turn it off immediately.
What is the most severe warning light?
When the check engine light is illuminated, it may indicate severe damage to the vehicle’s engine. Ignoring this warning could leave one at risk of a blown head gasket or even a seized engine, making this warning all the more important to address promptly.
This Kenworth Warning Light blog article was extremely helpful in understanding what different warning lights mean on my truck. It made me feel more confident when I’m out on the road as I now have a better idea of what to do if one of those lights come on. Thank you for this useful information!