New Holland 134 Hydraulic Oil Equivalent

New Holland 134 hydraulic oil is a multi-purpose fluid that can be used in various agricultural and construction equipment. However, it can be challenging to find and expensive to purchase. If you are looking for a replacement for New Holland 134, several other oils are equivalent.

⚡️Another article: New Holland Warning Lights Symbols

Equivalent Oil Manufacturer Cost
Cenex Quiklift HTB Cenex $20/gallon
CaseIH HyTran Ultraction CaseIH $25/gallon
New Holland MasterTran Ultraction New Holland $30/gallon
John Deere J27C John Deere $35/gallon
Allison C4 Allison $40/gallon

New Holland 134 Hydraulic Oil Equivalent Development

When choosing a replacement for New Holland 134, it is essential to consider the following factors:

  • The type of equipment you will be using the oil in.
  • The operating conditions of the equipment.
  • The cost of the oil.

Some of the most popular equivalents to New Holland 134 include:

  • Cenex Quiklift HTB
  • CaseIH HyTran Ultraction
  • New Holland MasterTran Ultraction
  • John Deere J27C
  • Allison C4

These high-quality oils meet the same performance standards as New Holland 134. They are also available at various prices, so you can find one that fits your budget.

How to Change Your Hydraulic Oil

Changing your hydraulic oil is an important part of regular maintenance for your equipment. It is recommended that you change your oil every 1,000 hours of operation.

To change your hydraulic oil, you will need the following tools:

  • New hydraulic oil
  • Funnel
  • Drain pan
  • Wrench


  1. Park your equipment on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Locate the hydraulic oil reservoir.
  4. Place the drain pan under the drain plug.
  5. Use the wrench to loosen the drain plug.
  6. Allow the old oil to drain into the pan.
  7. Replace the drain plug and tighten it with the wrench.
  8. Remove the oil filler cap.
  9. Pour the new oil into the reservoir using the funnel.
  10. Replace the oil filler cap.
  11. Start the engine and let it run for a few minutes.
  12. Check the oil level and add more oil if necessary.

Here are a few tips for choosing a hydraulic oil replacement:

  • Read the owner’s manual for your equipment to find out the recommended type and weight of oil.
  • Talk to a qualified mechanic to get their recommendations.
  • Compare prices from different suppliers.
  • Buy from a reputable supplier.


Several high-quality hydraulic oils are equivalent to New Holland 134. When choosing a replacement, it is essential to consider the type of equipment in which you will use the oil, the equipment’s operating conditions, and the oil’s cost.

Rate this post

Leave a Comment


Ask an Expert

*Follow this page every hour. We will respond to you regarding the comment you make or the question you ask.