Reset Fuel Pump Shut Off Switch Location

This is a common issue when a car engine cranks but does not start. It can be caused by passing over potholes, speed bumps, or an accident. The reset button on the fuel cut-off switch may need to be pushed to fix it, as it has been activated due to impact. However, if this does not work, the fuel pump shut-off switch might become stuck and require further troubleshooting. To help diagnose and reset such buttons on GMC, Chevy, Ford, Peugeot, VW Golfs, Citroen, Vauxhall, Subaru, Renault, Dacia, Mazda, and many other cars that use electric fuel pumps, an article has been written detailing how to locate and reset power shut off switches in these vehicles. The article also explains what a ‘fuel pump emergency shut off switch’ entails so readers can understand why this needs to be done for their car engines to crank successfully again.

⚡️Another article: Def Warning Light Reset Freightliner

What is Fuel Pump Emergency Cut-Off Switch?

Manufacturers of vehicles have implemented an inertia switch, which functions similarly to an electric fuse. Upon being triggered by sudden stops or crashes, the device will shut off the fuel supply and minimize any further damage from occurring. This provides operators an extra layer of safety within their vehicles and reflects manufacturers’ dedication to providing secure driving experiences for all users.

🚨You may be interested in: Mini Cooper Light Bulb Warning Light Reset

What is the Fuel Reset Button for?

This practical feature was created to be triggered by an impact or crash, resulting in the immediate disruption of gasoline supply to the combustion engine. The fuel reset button, identifiable through red or yellow markings, can be activated with firm control.

5 Important Steps Before Resetting the Fuel Cutoff Switch

5 Important Steps Before Resetting the Fuel Cutoff Switch
5 Important Steps Before Resetting the Fuel Cutoff Switch

Confirming the fuel pump shut-off switch is the cause of engine failure before taking action is essential. Careful examination of the situation and determination if other issues are present should be conducted before pushing the “red button,” ensuring optimal performance and safety for all involved.

📢Read also: Ford C-max Engine Malfunction Warning Light Reset

How to tell if the inertia switch is tripped?

It is essential to thoroughly investigate any potential issues with a vehicle’s fuel inertia switch. To do so, it is necessary to check the battery charge and functionality, inspect the fuel pump relay for proper placement and operation as well as its connector and wiring for damage, examine the fuse connected to the fuel injector and electric fuel pump for breaks or blown-outs, assess whether any clogged-up filters are present in either within the engine compartment or gas tank which may impede gasoline pressure delivery via vehicle’s fuel rail system, and determine if there are any leaks in the supply line from gas tank throughout entire length towards engine where gasoline injection would take place using components of the injection system.

How to Reset Fuel Pump Shut-Off Switch

Following a thorough investigation, it was discovered that an automobile collision had triggered the deactivation of the fuel supply. Generally located behind the glove compartment on the passenger side, this inertia switch must be reset according to model and manufacturer guidelines, typically by pushing or pulling down a lever or button. Restoring power in such a manner will then allow the fuel pump to return to its original operational status post-accident.

Steps to Locate and Reset Fuel Cut-Off Switch on Ford Fiesta (For Other Cars, Keep Reading)

To find the fuel pump reset switch, it is necessary to go through a few steps. First, open the glove compartment and pull out the inner section by pressing its left side. Then, look for a device with a red button or yellow rubber cap. Finally, push on the rubber cap button of the inertia switch to activate it. These steps ensure one can correctly locate and use their fuel pump reset switch.

🚨You may be interested in: Mazda Cx-5 Oil Pressure Warning Light Reset

Emergency Fuel Shut-Off Switch Location on Other Cars

A fuel pump shut-off switch installed in vehicles is an important safety feature. It helps to prevent damage to the fuel system during hazardous situations such as collisions. Depending on the make and model of the vehicle, this switch may be located in various places throughout the car’s interior. To help you locate it more easily, here are five common spots where you can find it:

  1. Behind or below your glove compartment;
  2. Underneath a side panel near your driver’s door;
  3. On the driver’s side between your footrest area and door;
  4. On the right wall of your luggage compartment, behind an access panel with a red reset button on top;
  5. Near your liftgate, behind an access panel in a right rear quarter trim panel with another red reset button.

Resetting this switch will save you time and money by avoiding expensive visits to mechanics or tow truck drivers. All that needs to be done is push down gently 20-30 times until it is loose enough to move downwards. After turning it off, it is back on for 10 seconds, ensuring no signs of leakage along the fuel line; starting up should not pose any problem afterward.

Alternative Method For Resetting the Fuel Pump Shutoff Switch

In a severe or moderate crash, a fuel pump shutoff is designed to prevent further fuel flow to the engine. It is important to note that this safety feature will not activate in every instance, and if it does, some steps can be taken to reset it. These include: switching off the ignition key and inspecting for any leaks in the fuel system; opening up the access panel and pressing down on the reset button; turning on the ignition key but only allowing it to remain for a few seconds before returning it to its ‘off’ position; inspecting again for any signs of leakage in the fuel system; attempting another start-up if no leaks have been detected; and lastly checking one more time for any signs of trouble after starting up your vehicle once more.

🚨You may be interested in: Honda Smart Key System Warning Light Reset

Vehicles with Airbag

In a crash, following specific steps to restart your vehicle is essential. To ensure the safety of all systems and components, here are five things you should do:

  1. Switch off the ignition and move the switch to the start position
  2. Wait for several seconds before proceeding with other steps or procedures recommended by manual or technician
  3. Turn on the ignition again to re-enable the fuel pump function in some vehicles as per the manufacturer’s instructions
  4. Repeat steps 1 through 4 once more if unsuccessful
  5. Contact a qualified technician for assistance if still unsuccessful
Rate this post

Leave a Comment


Ask an Expert

*Follow this page every hour. We will respond to you regarding the comment you make or the question you ask.