Warning Lights On Harley Davidson Speedometer

If you own a Harley Davidson motorcycle, then you know that the speedometer is one of the most important gauges on the dash. This gauge tells you how fast you are going and has a few warning lights that can tell you if there is a problem with your bike. This blog post will look at what those warning lights mean and how you can fix the problem.

See also: Chevy Malibu Years To Avoid

What do the warning lights on a Harley Davidson Speedometer mean?

What do the warning lights on a Harley Davidson Speedometer mean
What do the warning lights on a Harley Davidson Speedometer mean?

The warning lights on a Harley Davidson Speedometer indicate various aspects of the motorcycle’s status. The most important light is the oil pressure light, which comes on when the oil pressure is low. This can indicate a problem with the engine and should be checked immediately. Other warning lights include the coolant temperature light, which comes on when the engine is running too hot; the battery charging light, which comes on when the battery is not charging properly; and the turn signal light, which indicates that the turn signals are not working.

📢 Important updates: Harley Davidson Dash Warning Lights Meaning

How to interpret the different colors of the warning lights?

How to interpret the different colors of the warning lights
How to interpret the different colors of the warning lights?

Different colors indicate different levels of severity regarding the issue at hand. For example, red may indicate a serious problem that needs to be addressed immediately, while yellow may signify a less pressing issue that can be dealt with shortly. Green, meanwhile, usually indicates that everything is operating as it should.

Of course, it’s always best to consult your Harley Davidson’s manual for specific guidance on interpreting the meaning of each warning light color. But in general, here’s what you need to know:

  • Red warning lights indicate a serious problem that needs to be addressed immediately. If you see a red light on your speedometer, pull over and turn off the engine as soon as possible. Then consult your manual or call your local Harley Davidson dealer to diagnose and fix the problem.
  • Yellow warning lights: These aren’t quite as urgent as red lights, but they still signify an issue that needs to be dealt with fairly soon. If you see a yellow light on your speedometer, safely pull over and turn off the engine. Then, check your manual for more information on what could be causing the problem and how to fix it. You should be good to go once you’ve made the necessary repairs or adjustments.
  • Green warning lights: You’ll occasionally see green lights on your speedometer, which usually indicate everything operating as it should. However, it’s always best to double-check your manual just to be sure.

🚨You may be interested in: Blind Spot Warning Light Staying On

What to do when a warning light comes on?

What to do when a warning light comes on
What to do when a warning light comes on?

If you’re riding your Harley and a warning light comes on, taking immediate action is important. Depending on the severity of the issue, you may need to pull over and shut off your engine or adjust your speed.

If you see a red warning light, this indicates a serious problem that could result in engine damage if not addressed immediately. Pull over to a safe location and shut off your engine. Once the engine is cool, check the owner’s manual to determine the cause of the problem and how to fix it.

🚀Recommended article: Hamm Roller Warning Lights

If you see an orange or yellow warning light, this indicates a less serious issue that doesn’t require shutting off your engine. However, you should still address the problem as soon as possible. Check your owner’s manual for more information on the specific light and how to fix the problem.

If you see any warning lights on your Harley Davidson speedometer, taking action immediately is important. These warning lights are there for a reason and can indicate serious problems with your bike. If you ignore them, you could end up stranded on the side of the road or worse. So, if you see a warning light, check your owner’s manual and take the appropriate steps to fix the problem.

🚀Recommended article: Hamm Roller Warning Lights

FAQs About Warning Lights On Harley Davidson Speedometer

What does the speedometer warning light mean?

Green or blue lights indicate that a system is functioning properly. Orange/yellow warning lights suggest that the vehicle should be serviced or repaired soon but are less urgent than red and flashing lights. If you see a red light, it means that action needs to be taken immediately.

What is the red light on my Harley-Davidson speedometer?

Solid provides a reliable security system to protect one’s motorcycle. When the alarm has been activated, Solid recommends that the first step be to check all the lighting for any failed bulbs and replace them as needed. If all bulbs are functioning and the electrical system is still lit, then it is advised that one visit a Harley-Davidson dealer to investigate further.

Why is there an orange light on my speedometer?

The speedometer indication orange light indicates that the vehicle’s A check engine or malfunction indicator lamp has been activated. This means there is a potential issue with the car, which needs to be checked at an authorized service center for further inspection. Ignoring this warning could result in further damage to the vehicle, so paying attention to any signals from your speedometer, especially if an orange light indicates them, is important.

What might lead to a speedometer’s erratic behavior?

A speedometer that inconsistently jumps between speeds might be due to a faulty wire, a compromised wiring harness, or a damaged cable. Issues arise when the speedometer cable deteriorates, or a fuse is compromised. For instance, exposed wiring or connectors might malfunction in damp conditions, causing the fuse to fail.

How can one identify issues with the speedometer?

Identifying problems related to the speedometer can be straightforward. One should inspect for damaged wiring or obstructed connectors. Visible wear or damage is also a telltale sign. If the sensor is the issue, replacing it becomes necessary.

Why might a motorcycle’s speedometer not function correctly?

If adjusting various settings or the magnet’s position doesn’t rectify the issue, the motorcycle might have a malfunctioning speed sensor, display, or controller. Pinpointing the faulty component often requires specialized tools, necessitating professional intervention.

What are the indications of a malfunctioning speed sensor?

A compromised speed sensor can directly affect the operation of an automatic transmission. Symptoms of a faulty speed sensor include rough gear shifts, delayed shifting, limited gear functionality, and hard shifting.

5/5 - (4 votes)

2 thoughts on “Warning Lights On Harley Davidson Speedometer”

  1. I have a yellow light the shape of an engine in the Harley Davidson 2017 CVO limited speedometer. I don’t know where to find what is happening. I don’t know that there is anything wrong with the motorcycle. Does the owners manual have anything to say about what is wrong.

    Reply
    • The yellow engine light on your 2017 Harley Davidson CVO Limited is a malfunction indicator lamp (MIL), also known as a check engine light. It means that the motorcycle's onboard diagnostic system (OBD) has detected a problem with the engine or emissions system.

      The owner's manual for your motorcycle has a section on the MIL, which explains what it means and what to do if it comes on. The manual says that if the MIL comes on, you should take your motorcycle to a Harley-Davidson dealer or qualified technician to have the problem diagnosed and repaired.

      There are many possible causes for the MIL to come on, including:

      • A problem with the fuel system, such as a clogged fuel filter or a faulty fuel injector
      • A problem with the ignition system, such as a faulty spark plug or spark plug wire
      • A problem with the emissions system, such as a faulty oxygen sensor or catalytic converter
      • A problem with the engine itself, such as a worn piston ring or a faulty valve

      It's important to have the problem diagnosed as soon as possible to prevent further damage to your motorcycle.

      If you don't notice any problems with the way your motorcycle is running, you may be able to ride it to the dealer or technician. However, if you notice any problems, such as reduced performance, increased fuel consumption, or rough idling, you should have your motorcycle towed to the dealership or technician.

      Here are some tips for finding out what is wrong with your motorcycle:

      • Check the owner's manual for the MIL section. This section will explain what the MIL means and what to do if it comes on.
      • Use a Harley-Davidson diagnostic tool. This tool can be used to retrieve the diagnostic trouble codes (DTCs) that are stored in the motorcycle's computer. The DTCs can be used to diagnose the problem.
      • Take your motorcycle to a Harley-Davidson dealer or qualified technician. The dealer or technician will have the necessary tools and expertise to diagnose and repair the problem.
      Reply

Leave a Comment

×

Ask an Expert

*Follow this page every hour. We will respond to you regarding the comment you make or the question you ask.